Bent Glass

Bent Tempered Glass

One piece or thousands Bent Custom Glass is your source for Architectural & Interior applications.

A glass that’s all about safety……even when it breaks.

Tempered glass is often referred to as “safety glass.” And for good reason it’s more resistant to breakage than normal float glass. And if it is broken, it usually breaks into relatively small particles, which are less likely to cause injury.

 

Characteristics

  • Approximately five times stronger than annealed glass of equal thickness
  • Greater resistance to thermally-induced stress than heat-strengthened or annealed glass
  • Suitable for use as a safety glass
  • Tempered safety glass is also mandated in other parts of the world by individual country regulations or specifications

Applications

  • Suitable where safety glazing is required
  • Fire knock-out panels
  • All glass entrances and storefronts
  • Extreme wind loads
  • Fireplace enclosures

Availability

Glass Type 5/32″ (4mm) 3/16″ (5mm) 1/4″ (6mm) 3/8″ (10mm) 1/2″ (12mm) 3/4″ (19mm)
Acid Etch N/A N/A X X X N/A
Bamboo N/A X N/A X N/A N/A
Bronze N/A X X X X N/A
Clear X X X X X X
Glue Chip* N/A X X X N/A N/A
Grey N/A X X X X N/A
Low Iron Optiwhite N/A N/A X X X X
Low Iron Series 2 N/A N/A X X X X
Niagra Rain X X X X N/A N/A
P516 Obscure X X X N/A N/A N/A
Reeded X X N/A N/A N/A N/A

The Glue Chip that we stock is a Handcrafted pattern and as such the pattern will vary. It is not a rolled pattern.

Guidelines

Maximum Size 96” X 96”
Minimum Size 24” X 8” (24” is arc length)
Radius Range for 5/32″ (4mm) From 39.3” – Flat
Radius Range for 3/16″ (5mm)
From 39.3” – Flat
Radius Range for 1/4″ (6mm) From 39.3” – Flat
Radius Range for 3/8″ (10mm) From 47” – Flat
Radius Range for 1/2″ (12mm) From 59” – Flat
Radius Range for 3/4″ (19mm) From 79” – Flat